Hefei Weixuan Wire Brushes Factory
Hefei Weixuan Wire Brushes Factory High quality , Best service , Reasonable price .
Add to Cart
High Tensile INOX Wire Flared Cup Brushes For Welding Seams
Product Description
High tensile crimped steel wire, 0.3mm diameter, for rust and paint removal, descaling, deburring and preparation of welding seams. For metal and stone working, cleaning, surface preparation and fabrication tasks. Use with angle grinders.
INOX Wire Flared Cup Brushes
| Outer diameter | 115mm |
|---|---|
| Hole size | 16mm |
| Wire material & W | Stainless Steel Crimp 0.3mm |
PRODUCT FINDER WELD SEAM CLEANING
Impurities or non-metallic inclusions can occur on the surface of the weld, depending on the welding procedure. Non-metallic inclusions do not adhere to the surface to the extent of the other materials in the weld. If a coating is later applied to the welded part, faults in the coating and corrosion can occur in the area of the inclusions.
Important safety instructions
For efficient and safe use, always choose the maximum possible brush diameter that can be fitted to the grinder.
As mentioned in the section on operating speeds, the brush diameter defines the peripheral speed.
It can also affect brush performance.
Installation instructions
Please read before fitting the brush.
• The speed of the drive shaft on your machine should not exceed the maximum safe speed of the brush.
• The length of the shaft should be sufficient to ensure a firm fit in the chuck.
• Brushes with a clamping shank can be installed without problems in standard drill chucks or collets.
• The connecting threads on the brushes have flats for simple installation and removal.
PRODUCT FINDER WELD SEAM CLEANING
Impurities or non-metallic inclusions can occur on the surface of the weld, depending on the welding procedure. Non-metallic inclusions do not adhere to the surface to the extent of the other materials in the weld. If a coating is later applied to the welded part, faults in the coating and corrosion can occur in the area of the inclusions.
Important safety instructions
For efficient and safe use, always choose the maximum possible brush diameter that can be fitted to the grinder.
As mentioned in the section on operating speeds, the brush diameter defines the peripheral speed.
It can also affect brush performance.
Installation instructions
Please read before fitting the brush.
• The speed of the drive shaft on your machine should not exceed the maximum safe speed of the brush.
• The length of the shaft should be sufficient to ensure a firm fit in the chuck.
• Brushes with a clamping shank can be installed without problems in standard drill chucks or collets.
• The connecting threads on the brushes have flats for simple installation and removal.